Showing posts with label Tips 'n Tricks. Show all posts
Showing posts with label Tips 'n Tricks. Show all posts

Friday, August 31, 2012

Preparing Your Car For Summer Driving


Summer Driving
We always appear to make positive our cars are prepared for the winter, right?
But what about in the coursework of the summertime? Think it or not, the heat takes its toll on your automobile, , so it is crucial to keep your automobile maintained.
Periodical maintenance on your automobile will save you wondrous hassle in the long run. Your vehicle had better last longer and command a higher resale cost, ! I made it a point to get my automobile maintained according to the dealer's schedule, and when I traded it in, I got far over I expected due to the stellar condition of the engine.
Now I do know this Is not bedtime reading, but the owner's manual can be your best mate - assuming you read it! At least take a look-through periodically. How about while you are waiting to get your oil changed?
Follow the manufacturer's recommended service schedules. This might save you a major collapse.
Have the air conditioning method looked over by a certified technician. A check up here can save you an immense bill later.
The greatest cause of summer breakdowns is overheating. Prevent this issue by ensuring the engine cooling method is flushed and refilled as recommended.
Have your car's belts, clamps, and hoses checked by a technician. This only takes a couple of minutes and is usually cheap.
Fine-tune your oil and oil filter every,000 miles or times a year.
Replace air and fuel filters as recommended.
Get plenty of windshield washer solvent - they have a crooked to make use of more of this in the winter, so your fluids may be low.
Tires had better be rotated every 5000 miles or so.
Check the spare tire to make positive it is inflated in lovely order. Also, make positive you have a jack along with it!
Transmission method troubles match funds troubles match emotional troubles! Have your transmission method serviced periodically, and prevent big-time repair bills.
In case you notice that your brake method are less efficient, get them checked out right away.
Have your battery checked periodically to see how much life it is left!
Inspect all lights and bulbs to make positive they are working.
Take a first aid kit, flares, jumper cables, a flashlight, and a mobile phone.
There you go - a simple list to keep your automobile in great walking shape. Keep in mind, your automobile needs to be serviced and checked over even in the summertime.
Looking after your automobile takes only a couple of minutes every month, and pays you giant dividends for the life of your vehicle!

Friday, August 24, 2012

Automobile Stereo Installation Guide


Automobile Stereo Installation Guide
Need to save some money? Ever wonder in the event you could do an automobile stereo installation yourself? Yes, you can do it yourself! Go ahead, spend that money on your hardware! Don't spend it on labor. Besides, doing an automobile stereo installation yourself can be a rewarding experience, not to mention you can learn a lot from it . Nothing beats the feeling of seeing your 'creation' in action, walking smoothly & perfectly.
But be cautious, you won't need to destroy your expensive hardware. Well, most automobile audio hardware are no-brainers to put in, you'd find that most of the time the parts have specially formed sockets & slots etc. & would only fit where it is meant to be installed. Still, it is best to proceed methodically.
In an automobile stereo installation, you need to pick what kind of rig you are going to put in to your vehicle. In the event you are a beginner, it is best you do an automobile stereo installation if it is a simple system. You may need to leave the complicated stuff to the professionals, like installing delicate equipment like LCD panels, motorized parts etc. if it requires the creation of custom panels & such.
Head units are of the simplest to do in an automobile stereo installation. Fortunately, most units follow the same size standards (DIN). In plenty of cars, time the factory radio is removed the aftermarket radio will slot in the hole. In plenty of other cars, a kit is necessary if the factory hole is giant, or not deep . In some cases the dash has to be cut. Any automobile stereo store ought to have kits necessary for installation.
There is types of mounting in an automobile stereo installation. ISO mounting is when the radio can be screwed to existing factory radio brackets, such as in most Japanese cars. Ring mounting is when an aftermarket radio comes with a metal ring that gets mounted to the factory radio hole or aftermarket kit by bendable tabs. In plenty of cars, dash & trim rings must be filed to enlarge the radio hole. time the ring is installed, the radio slides in & is held by snaps. In most cases, special tools are necessary to remove the radio.
Speakers are critical in an automobile stereo installation. No matter how expensive your speakers are, in the event that they are not properly installed, the sound won't be up to par.
In a simple automobile stereo installation, you'll probably be using speakers that slot in to a factory location. make definite there is no gaps or holes. Sometimes building a wood or fiberglass baffle helps reduce holes & gives you much better sound. But always be cautious when using power tools around speakers. Automobile stereo installation warranties usually don't cover holes in speakers.
For unconventional speaker locations, sometimes metal has to be cut. You may need to leave this to the professionals, tools like plasma cutters & pneumatics drills are necessary. But in the event you are going to insist, a pair of metal snips (left & right cut) will do.
An automobile stereo installation has to put up with vibrations & other noise sources in its surroundings. Although it is impossible to eliminate these , there is products that will greatly decrease the noise & rattling, on non-luxury cars. Liners, sprays & adhesive strips & even carpeting applied onto the panels can make a world of difference.

Monday, June 18, 2012

How to Makes Your Car Looks Like New

washing the car
Some automobile owners think rainwater is the only enemy to their automobile, but bird droppings, highway bugs, atmospheric pollution & road salt can also ruin the beauty of your automobile.

Plenty of owners think fighting these ever-diligent adversaries is a daunting task, so they don't usually bother, but truthfully, it is simpler than they think.

First, spray water gently to thoroughly wet the surface of the vehicle. This light rinse helps to loosen the dirt on the vehicle. Then divide your automobile in to sections: the top, the hood, the trunk, the right side & the left side. Start from the top, move on to the hood & the trunk, & then concentrate on the right side & the left side. Washing ought to always be completed gentle such that the dirt won't scratch the body of your automobile. Re-wet & then rinse each section, finishing in the same order- top, hood, trunk & sides.

Step one: Washing
Polishing ought to only be completed a tiny section at a time. Add an even coating of polish onto a towel, & then apply to the vehicle surface gently in tiny, even & circular motions. Start at the top & working your way down to the trunk & hood, finally ending with the sides. The polish ought to be allowed to sit on the paint surfaces for at least to0 minutes. After this time, remove the residue with a different cotton towel by pressing firmly on the surfaces. The same procedure may be applied to all other sections.

Step two: Polishing
Use a soft & neat terry cloth towel to apply wax to a tiny section of the automobile. The application of wax to the automobile can be completed similar to how polishing has been carried out. The only difference is you ought to wait until the wax has dried to a slight haze. In the event you are striving, repeat the whole technique again, adding a second coat of wax to the vehicle.

Step three: Waxing
And there you have it! You've removed the dirt & grime; polished away the tiny spots & scratches; & added another layer of protection to your vehicle's finish. By now your automobile ought to glitter like it did the first day you got it.

Tuesday, June 12, 2012

History of Car Pinstriping


Car Pinstriping
Custom pinstripes started appearing on automobiles in the mid-1950s. Although pinstriping had been on cars long before that, the last American automobile to appear with auto pinstriping had been made by General Motors in the late 30's. For those individuals with muscle or sports cars, customizing their ride is an important part of owning and showcasing the vehicle, and pinstriping is a final touch.
Did you know pinstriping has a long history? Even before the invention of automobiles, pinstriping was used as a decorative decoration for horse and buggy carriages.
Mechanical pin striping is the best way to stripe larger vehicles- trucks, vans, or station wagons. The benefit is it lays down stripes of constant width, letting you focus attention on getting the stripe oriented properly along your working surface. You can set up your stripe lines using magnetic pinstriping strips with middle grooves designed to be paint templates. They hold fast to steel surfaces, and can also work as guidea for your hand.
Pinstripes are often painted in colors: that sets off the body color, and another, narrow line, in a color contrasted with the stripe to make it stand out.
Freehand pinstriping is the most difficult process, requiring the most practice to master, but permits unrestricted creativity. The simplest plan for a freehand striping beginner is to lay a strip of masking tape down about a quarter inch from where you require the completed line to be, and then use this tape as visual guiding for your stripes. Whatever you do, don't use regular masking tape, or your pinstriping paint will bleed under the edge. Get some auto body masking tape from an auto supply store.
Striping with stencil tape is also popular. There's several types of stencil tape that are suitable for auto pinstriping applications. Stencil tape striping makes use of brushes, and a specialized pinstriping brush is an essential ingredient in a successful project. Stencil tape lets you apply different color stripes without needing the other stripes to dry.
No matter what process you use, pinstriping is of the finest ways to make your vehicle unique. like anything else worth doing right, practice makes priceless results but having the best equipment you can get your hands on helps .

Saturday, June 2, 2012

Test Driving Your Car


Test Driving a CarGetting a new car thrills and excites. Sometimes it is easy to get carried away in our initial response to a car. No matter how much you like a certain vehicle, take it for a long, serious test drive.
You should first plan on spending as long as possible on your test drive. Fifteen minutes Is not enough time. You want to thoroughly examine the car and definitely have a car-mechanic check it out.
Take a look at the vehicle overall. Do the body parts line up? Does the paint match? Will doors open and close easily? Do the tires look like they wear evenly?
Check under the hood. You may not know exactly what you’re looking at, but that is okay. Look for leaky hoses, worn belts, and dirty oil. Ask the dealer to show you the automatic transmission fluid. Smell it. If there is a “burned” odor, steer clear. The fluid should be clear and reddish. Transmission repair costs are not pretty.
Have someone show you the radiator water. It should have a light yellow or green color.
Make sure all of the warning lights and gauges work. Start the car and check entire lights and functions. And here’s a no-brainer - make sure no warning lights remain lit on the dashboard.
Look at the airbag indicator lights. If these lights do not light up as you start the car, or if they stay lit after the car is running, they are not working correctly.
Try on the seat belt. Test the vehicle in the early evening to determine the headlight visibility. If you already have a child safety seat, go ahead and install it. Not all seats are compatible with all cars.
Accelerate up to 35-40 MPH. Is shifting smooth and steering straight? When braking, a pull to the left or the right could indicate a problem.
If you buy via the classifieds, make sure to check the name on the title and match it to the name on the seller's driver's license. Just to be safe.
It would be nice to find the little lady’s almost new car that was not driven more than 15,000 miles a year. Of course, low miles on the odometer would be a big plus, too. Even then, you can not assume that a low-mileage car is necessarily in great shape.
One major concern is odometer tampering. So do your homework. Ask for a detailed service history report. If records were not kept, you can check things out for yourself with the vehicle identification number. Provide this VIN number to your state vehicle history company to get a record of the car’s former life.
Remember, no matter how in love you are with a car, think twice before purchasing one that’s been wrecked. You do not need anyone else’s problems. There are dozens of other cars you could enjoy just as much.
So test drive more than one car. You will never regret a wise, well-thought out purchase.

Wednesday, May 30, 2012

Maintaining Your Snowblower

Snowblower

If you do not want to be standing out in the cold arguing with a snowblower that does not want to run, then do the annual maintenance before the snow starts flying. Regular maintenance will give you years of hassle free use, and less attitude from your blower. Do not forget the safety aspect, because without proper maintenance your snowblower could become a hazard.
Each fall before winter arrives, you should check all bolts, belts, and moving parts, to ensure they are not frayed, loose, or worn. Belts are best checked by removing and checking for cracks. Replace any worn parts, and tighten any loose bolts.
Turn your snowblower on its side and check the scraper bar. This is the bar that rubs against the ground and scrapes the snow off. This item wears, so check to see if it need replacement. If you neglect to replace the bar when it is worn, it will lead to damage on the snowblower's housing, and that's will hurt your pocket book. In fact, if your snowblower gets a lot of use through out the season, check it regularly.
Check the rubber paddles and the rubber on the auger. If your finger fits between the rubber and the housing it's time to replace the rubber. A new rubber will help your snowblower operate at its optimum performance levels.
Check tires for wear and proper inflation. Adjust as needed. If you have tire chains for your snowblower, have them handy or put them on in advance. There's nothing worse than searching in the freezing cold, while trying to remember where you put the chains.
There are only two types of snow blower engines: The two cylinder engine which uses mixed gas and oil. You will just need to replace the spark plug on this style of engine.
If you have a four cylinder engine which applies straight gas, with the oil in the crank case just like your vehicle, you will need to change the oil, spark plug, and filter. You should also check the oil each time before you start it. Most four cylinders use 5W30 oil, and hold approx 20 ounces. Refer to your owner's manual for the correct oil weight, and replacement part numbers.
Lubricate the drive and chassis. If you have two stage blower, be sure you check the lube in the gear box. Check with your owners manual whether you have a one stage or two stage. It will also tell you the type of lubricant to use.
If there was fuel left from the previous year, you will need to siphon it off, and fill the gas tank with fresh gasoline. It doesn't hurt to add some methanol in with the fuel, once or twice a season, to avoid condensation from building up in the tank, or the carburetor icing up.

Monday, May 21, 2012

Recycled Car Parts


So you are mechanically inclined? Fabulous! You probably know a lot about fixing and installing car parts. When working on vehicles, there are certainly times when parts need to be replaced, costing you and, in turn, the customer a lot of money. But there are ways to cut your costs. Have you considered applying recycled car parts?

Automotive recyclers offer great deals on used car parts. There are numerous recyclers out there than you might think. And their prices are hard to beat. One reason is that insurance companies can save money themselves by dropping off wrecked vehicles at a recycling yard. There are many other incentives, though, to shop from these guys.

Did you know that purchasing used car parts from auto recyclers helps keep pollution caused by producing new parts? A lot of oil is used to manufacture new car parts-resources that are saved by recycling. Reusing raw materials is beneficial to the environment. And finding the right car parts should not be too hard. Currently, more than 4 million cars are recycled every year in North America. That's a lot of available car parts!

Recycling car parts saves a lot of space in landfills. Why throw something away when it can still be used? Also, buying used car parts allows you to use quality parts made by the original manufacturer. Recyclers are skilled in checking which car parts are damaged and which are reusable.

And it is true: used car parts help you save money. Clearly, this is a cheaper option to purchasing new car parts. But are you getting the same quality? Good question. Actually, most automotive recyclers give guarantees on car parts, so you will not need to worry about buying a lemon. Better yet, recyclers can often find car parts faster than other dealers, as they have developed an electronic network to communicate quickly with other recyclers. If they do not have what you need in stock, chances are they can find it in no time.

Next time you are searching car parts, consider your local automotive recycler. You will be satisfied with the product, and also with the price.

Sunday, May 20, 2012

Dealing With an Overheated Radiator

Car with Overheated Radiator
Radiators are essential parts of any engine cooling system. They are designed to dissipate the heat, which the coolant has absorbed from the engine. However, like all auto parts, radiators are prone to damage and corrosion. As it is mostly made of metal and is in constant contact with liquids, radiators can collapse over time due to corrosive forces. Defective radiators can spell doom for any engine. Irreparable damage can result if a malfunctioning radiator is not repaired or replaced immediately. Overheating is one of the most common collapses that autos encounter during the summertime season. It happens when the temperature of the coolant passes the normal operating temperature range of the engine. Overheating has many causes. Idling under hot weather for extended periods can wreak havoc on the cars cooling system, because the water pump does not turn fast enough. Thus the coolant is not circulated, as it should be. Sometimes a leak may cause the coolant level to drop thus causing the radiator to overheat. Here are a few pointers for dealing with an overheated radiator:

1. Turn off the A/C. If the car is not seriously overheating, this will reduce the engine's temperature. The AC evaporator is placed in front of the radiator, and it adds heat to the air going to your engine. The hotter the incoming air is, the less efficient the radiator will be.

2. Turn on your heater (set on highest temperature setting, with blower on highest setting). This will be uncomfortable for you, but it will cool the engine by transferring the heat to the air. Roll down the windows, and remember how 'hot' you will get if your engine needs replacement!

3. If you are stuck in traffic jam, pull over and stop. Unless you are moving, very little cool air reaches the radiator. Open the hood and let the engine cool down. This takes time, so be patient. Use the time to go get a jug of water or antifreeze.

4. Check the overflow tank coolant level. If it is empty, the radiator is probably low on coolant.

5. Check the pressure of the system by wrapping a cloth around the upper radiator hose and squeezing it. If it is still under pressure (hot) it will not squeeze easily. Wait until it does.

6. Place a large cloth over the radiator cap, and carefully release the pressure. Serious burns can result from the hot coolant. If in doubt, wait until the engine cools completely.

7. If the coolant is low, start the engine, and slowly add the water or coolant necessary to fill it up. The engine must be running. Adding coolant to a warm engine can crack the block. By running the engine, the coolant keeps moving and reduces the chances of this type of damage occurring.

Friday, May 18, 2012

Customizing Your Car Pinstriping


Car Pinstriping
Did you know pinstriping has a long history? Even before the invention of cars, pinstriping was used as an ornamental decoration for horse and buggy carriages.

Custom pinstripes began seeming on cars in the mid-1950s. Although pinstriping had been on cars long before that, the last American automobile to appear with auto pinstriping had been made by General Motors in the late 30’s. For those individuals with muscle or sports cars, personalizing their ride is an important part of possessing and showcasing the vehicle, and pinstriping is a final touch.

Pinstripes are commonly painted in two colors: one that sets off the body color, and another, thin line, in a color counterpointed with the stripe to make it stand out.

Mechanical pin striping is the best way to stripe larger vehicles- trucks, vans, or station wagons. The benefit is it lays down stripes of constant width, letting you focus attention on getting the stripe oriented properly along your working surface. You can set up your stripe lines using magnetic pinstriping strips with center grooves designed to be paint templates. They hold fast to steel surfaces, and can also work as guidea for your hand.

Striping with stencil tape is also popular. There are various types of stencil tape that are suitable for auto pinstriping applications. Stencil tape striping uses brushes, and a specialized pinstriping brush is an essential component in a successful project. Stencil tape allows you to apply different color stripes without needing the other stripes to dry.

Freehand pinstriping is the most difficult technique, requiring the most practice to master, but permits unrestricted creativity. The simplest plan for a freehand striping newbie is to lay a strip of masking tape down approximately a quarter inch from where you want the finished line to be, and then use this tape as visual guiding for your stripes. Whatever you do, do not use regular masking tape, or your pinstriping paint will bleed under the edge. Get some auto body masking tape from an auto supply store.

No matter what technique you use, pinstriping is one of the finest ways to make your vehicle distinctive. Just like anything else worth doing right, practice makes priceless results but having the best equipment you can get your hands on helps too.

Wednesday, May 16, 2012

5 Auto Scams You Absolutely Must Avoid!


Auto Scam
People hate automobile dealers. Of course, there are always nice guys, but numerous car dealers just have to cheat their way to benefits. Here are the top 5 auto scams that you absolutely must avoid, or risk paying way too much for your car.





Scam 1: The Yo-Yo Financing Scam
The dealer deals you a car and allows you to take it home at once. You finance your car through the dealer, but a few days later, the dealer phones and tells you that your financing has fallen through. You are then ordered to set up new financing through the dealer, at a much higher cost to you, and a much higher income to them. Avoid this at any cost! If you have bad credit, do not finance at the dealer. Arrange your own financing. If you finance through the dealer, never drive off your car immediately. You should hold at least 24 hours before taking your new car, so as to make sure funding is complete. This allows the dealer no way to play the scam on you.

Scam 2: The Window Etching Fee
This is one of the most ridiculous but usual scams I have heard off. Basically the dealer offers to window etch your VIN number in the window of your car for you, at a price ranging from $300 to $1000. Some people have tried to talk down the cost, and they often succeed, but the dealer still draws a few hundreds off you. The easiest way to solve this problem? Just purchase a do it yourself window etching kit at any decent auto parts store. It only costs $20.

Scam 3: The Dealer Preparation Fee
The dealer charges you a preparation fee to prepare your car. Some often charge an unconscionable $500 or more just to peel off the plastic protection on the car, test drive the car and put in the fuses. Most MSRP stickers show that these costs have already been covered by the manufacturer. In fact, some car dealers permanently print it on the buyer's order to make it seem mandatory, but one way you can get it removed is by telling the dealer to add a credit (of the equal amount as the dealer preparation fees) on the next line. If they decline to do so, you should simply walk out of the dealership.

Scam 4: The Market Adjustment Fee
In this scam, the dealer tells you that your car is a genuinely popular vehicle, and so to sell you the vehicle they have to add "Market Adjustment Fees" of several thousand dollars. This sum of money is commonly indicated on an orange sticker next to manufacturer's MSRP sticker. A car possibly popular, but if it is in stock, it is not worth paying extra for it. Many buyers, especially trade-in buyers, have been ripped off before. They focus only on what they get for their old car, and so they do not see the big picture. They may get an extra few thousand for their car, but they do not notice that they're bucked a much higher Market Adjustment Fee. The dealer sells the car, gets the trade-in, and makes an extra off the buyer. Never pay more than the manufacturer's MSRP.

Scam 5: The Extended Warranty Scam
The Extended Warranty scam is quite old but it's still in use. And many people still do fall for it. Basically, when you take a loan on your car, the dealer will say that you have to purchase an extended warranty because the bank requires it for the loan. Deflecting this scam is very simple actually. Tell the dealer to write down in black and white that the extended warranty is required for the loan and they will most probably find some excuse to remove the extended warranty. If they refuse to do so, then please do not buy from that dealership. Actually, the extended warranty is a great thing to have, but do not ever get it from the dealer. You can get far better deals elsewhere, especially online.Don’t get cheated by car dealers!

Monday, May 14, 2012

How To Reduce Fuel Consumption


Reduce Fuel Consumption
Gasoline costs keep skyrocketing. But there is a lot a motor rider can do to shrink fuel consumption. There are quite a few easy and cheap maintenance steps that can be taken to add miles to every gallon and save money.

Consumers waste millions of dollars each day because of dirty oil, worn spark plugs, faulty thermostats, loose gas caps, underinflated tires, malfunctioning engine controls, poor wheel alignment, dirty air filters, and so on. These troubles are basic and easy to take care of, yet still they're major causes of wasted fuel.

As they say, "a stitch in time saves nine". With proper maintenance you can save a lot of fuel. Avoid gas vaporization by ensuring that your vehicle gas cap is not damaged, loose or missing. Your tires must be in good order inflated; otherwise it can cost you a few miles per gallon. Replace your spark plugs regularly to avoid misfiring and fuel wastage. Replace clogged air filters and improve fuel consumption rate by as much as 10 percent.

Driving habits are another major contributor to poor fuel economy. Bad habits include overstepping speed limits, aggressive driving, excessive idling, carrying heavy items in vehicle, and the list goes on.

Fast driving in low gears can consume up to 45% more fuel than is needed. When traveling at highway speeds keep windows closed. Open windows reduce your mileage by 10%. You should drive steadily. Sudden changes in speed wastes fuel.

A lot of fuel can be wasted by prolonged warming up of the engine. You don't need to warm up engine for more than 45 seconds even on cold mornings. Starting and stopping your engine needlessly is another no-no. Avoid revving the engine, especially just before it is switched off.

You should also buy your gas carefully. Choose quality brands that provide greater economy. Buy your gasoline during the coolest times of the day. And never fill your gas tank to the top. The gas can slosh over and out of the tank.

Other fuel saving habits include avoiding rough roads, using straighter roads, regular tune-ups, inspection of suspension and chassis parts for misalignment, and removing snow tires during good weather seasons.

How To Beat Dirt Bike Jumps


Dirt Bike Jumps
If you ever want to ride on a motocross track you're going to have to learn to beat the dirt bike jumps. At first they are a very scaring affair, and riding at them with any pace looks almost suicidal but to get anywhere in dirt bike racing you need to face them and you need to beat them otherwise you will not get anywhere and you will not have any success. When you first start dirt bike racing you will be lucky to get a couple or feet of air and stay upright when you land, but this will all change when you have a little experience and a little knowledge behind you. The only real trick to being any good over dirt bike jumps is to practice and keep practicing.

The best way to beat dirt bike jumps.

It is true that there are no quick fixes to beat dirt bike jumps and the real key to success is to practice and keep practicing. However, there are some basic guidelines that will increase you chance of success and it is these guidelines you should be practicing.

Firstly, you posture should be that of a standing up position but crouched slightly and gripping the bike with your legs; if you do not grip with your legs you and the bike are likely to become separated and this will ensure that you can land relatively comfortably in a sitting position. It also stops the bike from kicking out sideways if you hit a bump on the way up the ramp.

As you approach the ramp you should know pretty much exactly where you want to be on the up ramp; finding the line on the ramp and keeping an even throttle all the way up. Again, this will mean less chance of the bike jumping if you hit a bump or a rock.

If you want to land with your bike upright and you on the seat, then when you have got air you need to be looking where you are going to land and amend your bike position accordingly so if you are landing on the flat lift your handle bars before you hit the ground; this way your rear wheel will make contact first and will take most of the pressure of the landing. If, however, you are landing on the down slope then you need your bike to be at the same angle as the slope. To alter your bike’s position, you can either rev while in the air which will drop the rear of your bike or you can let up on the clutch and apply the back brakes giving the opposite effect.

The second before you land get straight onto your clutch, the revs will help your rear suspension take the blow and will give you good speed on landing. One of the hardest things about dirt bike jumps is having the confidence to pull it off. If you are confident then you will stand more chance of doing everything as well as you can so practice and practice hard; do not get too carried away at first though, just take it at your own pace.